Estimated Arrival: Between Oct 11 and Oct 13. *ETA to the USA Only
Shipping & Returns: Free Shipping. All The Time.
10AWG Generator Power Inlet Box
Outdoor generator inlet boxes keep dangerous carbon monoxide fumes away from your house when the generator is working. Our generator power inlet box passed the certifications of ETL. Mount the box outside and run the wires to a transfer switch or panel. Then, when emergency power is needed, connect a generator cord to the inlet box.
50 AMP Generator Inlet Box
Enough Space & Green Light Indication
Weatherproof Baking Finish
Practical Twist & Lock Design
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
Straightaway Wire Diagram
ETL listed outdoor electrical inlet box is prepared for a 50 Amp SS2-50P generator cord. It is designed to be installed outdoors in an open area where the generator is ready for backup power during a power outage.
Enough Room for Wiring
It's easy to get the wires in the proper spot with the removable front panel. This watertight electrical inlet box is wired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors.
Considerable Details & Sturdy Structure
4 recommended areas for punching the hole: left, right, bottom, and back. For security and convenience purposes, they need to be drilled through with drilling tools. And there are pre-punched sturdy screw holes for easy mounting on the wall.
Suitable for Outdoor Use
Our power inlet box is constructed of rugged steel and covered with corrosion-resistant coating inside and out. The rustproof coating design and flip design can easily keep from much bad weather, including wind, rain, dust, blizzard, etc.
The power inlet box for generators adopts the design of a locking structure. When the plug is inserted and twisted into the locked position, it will not slip from the power inlet box due to wind, hurricane, heavy rain, snow, etc.
Our power inlet box is ideal for connecting your wires to a generator to provide power in an emergency power shortage. You can install the inlet box on outer walls, wooden houses, stakes, tree trunks as you required.
Wire Gauge: 10AWG
Voltage: 125 Volts
Material: Coated Steel
Product Weight: 2.4lb/1.1kg
Maximum Wattage: 6250 Watts
Four Knockouts: Left, Right, Bottom and Back
Product Dimension: 4 x 3 x 5.9inch/10.3 x 7.65 x 15cm
1 x SS2-50P Inlet Box
1 x Plastic Strap