5 Tips for Getting the Most Out of a Lithium Jump Starter

Your lithium jump starter can go anywhere with you. It’s useful for long road trips when you’re stranded at home and need to jump the motor, and it comes with adapters, so it’s useful for recharging your smartphone. However, you need to take care of the jump starter so it stays working longer. Here are five tips for getting the most out of a lithium jump starter.

Store the Jump Starter at a Cool Temperature

One of the worst things someone could do to their jumper is not storing it in a cool place. Much like a generator, a jump starter needs to be safely placed in a moderate-temperature space, between 50 and 70 degrees Fahrenheit. The best place to store the jump starter is in the trunk. Since sunlight doesn’t touch the floor, the space is cooler.

Learn How To Maintain the Jumper

One way you can improve a jump starter’s life is by learning to maintain it. Start by reading the owner’s manual, where you learn tips and tricks on cleaning, inspecting, and maintaining the starter and its accessories. One way to maintain the quality of the jumper is to wipe down the clamps between each use.

The clamps could hold oil residue from previous uses, making the clamps harder to latch on and jump a vehicle. Make sure to clean the clamps between every use—this is good to know as your maintenance knowledge improves.

Charge the Jump Starter When It Runs Low

Even though you can use the jump starter when needed, keeping it in a discharged state is not good for the battery, especially if you need it in an emergency. Jump starters work great when they’re recharged to a full battery. Charging your jump starter battery often is okay, as it doesn’t run into any malfunction issues.

Make Sure To Unplug the Cables After Every Use

Don’t leave the jump starter on the vehicle after the motor roars to life again. Once the engine turns on, immediately remove the clamps. If a motorist fails to remove the jump starter clamps immediately, a dangerous electrical arson could happen, causing significant damage to the vehicle and others. Additionally, this causes damage to your cables. Remove the cables upon vehicle start-up or have a car expert do it.

Respect the Crank Cycle of the Jump Starter

The crank cycle of a jump starter is the number of times it cranks a car before a resting period. If you don’t respect the crank cycle, heat builds up in the jump starter’s batteries and damages the internal structure. Look at the owner’s manual for an overview of how many cranks you should do, followed by the resting period.

You can get the most out of your jump starter, but following these tips will extend its life so you can use it much longer. If you ever have questions about jump starters, contact us. We’re happy to guide you through by answering questions and talking about the NOCO battery booster we offer on our site. Let’s keep your car going with a battery booster.